V/UHF Transceiver Module and Power Amplifier with Filter, operating in the frequency range of 30-512 MHz, delivers rated power into 50 Ohms load at 28 V DC. Circuits are housed in aluminum housing with heat sink built in. The Power amplifier has built in protection features for adverse conditions of load VSWR and Temperature
| Frequency range | 30-512 MHz (V/UHF band) |
| Channel spacing | Narrow Band : 8.33 kHz,12.5 kHz, 25 kHz Wide Band : 1.2 MHz, 5 MHz |
| Frequency Tuning | 10 Hz (min) |
| Mode of Operation | Half Duplex, FF, FH |
| Reference Frequency | 10 MHz External / Internal |
| Settling time | < 100 us |
| LO phase noise | 10 kHz: -110 dBc/Hz (Typical) |
| Frequency presets | Storage > 100 presets |
| Noise Figure | <= 8 dB |
| IF/Image rejections | >= 80 dB |
| Waveforms supported | AM,FM,FSK,FF and FH,CFSK/CPM GMSK/QPSK/QAM |
| Inter modulation rejection | >= 65 dB |
| Receiver dynamic range | 80 dB(min) |
| Maximum input level | +30 dBm continuous |
| Sensitivity | AM: -110 dBm with SINAD >=10 dB at 70% modulation depth (ref. 1KHz tone). -115 dBm with SINAD >=12 dB 5 kHz deviation (ref. 1 kHz tone) |